RPS-504
The RPS 504 punching & shearing line has been developed for the special market requirements of the steel fabricators and steel service centers and the machine constructors and is appropriate for punching and shearing of flat bar and angle steel.
Technical Data
Vertical Punch Unit
| Capacity Flat Steel (min. – max.) | mm | 50 x 5 – 500 x 25 |
| Capacity Angle Steel (min. – max.) | mm | 50 x 50 x 5 – 160 x 160 x 5 |
| Capacity U Profile (min. – max.) | mm | 120 x 55 x 7 – 320 x100 x 4 |
| Tool Exchange | piece | 4 |
| Punch Diameter (min. – max.) | mm | 5 – 40 |
| Punch Force | kN | 900 |
| Propulsion | kW | 2,2 |
Flat Shear Unit
| Capacity (min. – max.) | mm | 50 x 5 – 500 x 25 |
| Shear Force | kN | 1850 |
| Punch Force | kN | 1100 |
| Angle Force (Double Cut) | kN | 700 |
| Propulsion Flat Sheer | kW | 2,2 |
| Propulsion Punch / Angle | kW | 2,2 |
| Flat Shear Angle | degrees | 3 |
| Hydraulic Aggregate | kW | 18,5 |
| Operating Height | mm | 1.050 |
| Compressed Air | bar | 6 – 8 |
| Air Consumption | l/min. | 250 |
| Weight | Approx. kg | 14.000 |
| Dimensions (L x W x H) | mm | 1800 x 2700 x 2800 |